WEL     100

100     WEL 100 FUNDAMENTALS OF WELDING (3 CR.) Introduces electric and gas welding and cutting. Provides fundamental principles of joining ferrous and nonferrous metals, welding and cutting processes, equipment operation, and safety procedures with emphasis upon welding and cutting procedures. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     100

100     WEL 100 FUNDAMENTALS OF WELDING (3 CR.) Introduces electric and gas welding and cutting. Provides fundamental principles of joining ferrous and nonferrous metals, welding and cutting processes, equipment operation, and safety procedures with emphasis upon welding and cutting procedures. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     100

100     WEL 100 FUNDAMENTALS OF WELDING (3 CR.) Introduces electric and gas welding and cutting. Provides fundamental principles of joining ferrous and nonferrous metals, welding and cutting processes, equipment operation, and safety procedures with emphasis upon welding and cutting procedures. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     100

100     WEL 100 FUNDAMENTALS OF WELDING (3 CR.) Introduces electric and gas welding and cutting. Provides fundamental principles of joining ferrous and nonferrous metals, welding and cutting processes, equipment operation, and safety procedures with emphasis upon welding and cutting procedures. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     110

110     WEL 110 WELDING PROCESSES (3 CR.) Introduces types of welding, their advantages and disadvantages. Points out effects of welds on metals to be machined. Provides practice and demonstration in welding. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     110

110     WEL 110 WELDING PROCESSES (3 CR.) Introduces types of welding, their advantages and disadvantages. Points out effects of welds on metals to be machined. Provides practice and demonstration in welding. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     110

110     WEL 110 WELDING PROCESSES (3 CR.) Introduces types of welding, their advantages and disadvantages. Points out effects of welds on metals to be machined. Provides practice and demonstration in welding. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     110

110     WEL 110 WELDING PROCESSES (3 CR.) Introduces types of welding, their advantages and disadvantages. Points out effects of welds on metals to be machined. Provides practice and demonstration in welding. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     115

115     WEL 115 ARC AND GAS WELDING (3 CR.) Presents arc and gas welding practices. Discusses safety, general welding practices and effects of welding on metals. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     115

115     WEL 115 ARC AND GAS WELDING (3 CR.) Presents arc and gas welding practices. Discusses safety, general welding practices and effects of welding on metals. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     115

115     WEL 115 ARC AND GAS WELDING (3 CR.) Presents arc and gas welding practices. Discusses safety, general welding practices and effects of welding on metals. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     115

115     WEL 115 ARC AND GAS WELDING (3 CR.) Presents arc and gas welding practices. Discusses safety, general welding practices and effects of welding on metals. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     123

123     WEL 123 ARC WELDING I (3-4 CR.) Teaches operation of AC transformers and DC motor generator arc welding sets, welding polarities, heats and electrodes for use in joining various metal alloys by the arc welding process; deals with running beads, butt, and fillet welds in all positions. Emphasizes safety procedures. Variable hours per week.

WEL     123

123     WEL 123 ARC WELDING I (3-4 CR.) Teaches operation of AC transformers and DC motor generator arc welding sets, welding polarities, heats and electrodes for use in joining various metal alloys by the arc welding process; deals with running beads, butt, and fillet welds in all positions. Emphasizes safety procedures. Variable hours per week.

WEL     123

123     WEL 123 ARC WELDING I (3-4 CR.) Teaches operation of AC transformers and DC motor generator arc welding sets, welding polarities, heats and electrodes for use in joining various metal alloys by the arc welding process; deals with running beads, butt, and fillet welds in all positions. Emphasizes safety procedures. Variable hours per week.

WEL     123

123     WEL 123 ARC WELDING I (3-4 CR.) Teaches operation of AC transformers and DC motor generator arc welding sets, welding polarities, heats and electrodes for use in joining various metal alloys by the arc welding process; deals with running beads, butt, and fillet welds in all positions. Emphasizes safety procedures. Variable hours per week.

WEL     124

124     WEL 124 ARC WELDING II (3-4 CR.) Teaches operation of AC transformers and DC motor generator arc welding sets, welding polarities, heats and electrodes for use in joining various metal alloys by the arc welding process; deals with running beads, butt, and fillet welds in all positions. Emphasizes safety procedures. Variable hours per week.

WEL     124

124     WEL 124 ARC WELDING II (3-4 CR.) Teaches operation of AC transformers and DC motor generator arc welding sets, welding polarities, heats and electrodes for use in joining various metal alloys by the arc welding process; deals with running beads, butt, and fillet welds in all positions. Emphasizes safety procedures. Variable hours per week.

WEL     124

124     WEL 124 ARC WELDING II (3-4 CR.) Teaches operation of AC transformers and DC motor generator arc welding sets, welding polarities, heats and electrodes for use in joining various metal alloys by the arc welding process; deals with running beads, butt, and fillet welds in all positions. Emphasizes safety procedures. Variable hours per week.

WEL     124

124     WEL 124 ARC WELDING II (3-4 CR.) Teaches operation of AC transformers and DC motor generator arc welding sets, welding polarities, heats and electrodes for use in joining various metal alloys by the arc welding process; deals with running beads, butt, and fillet welds in all positions. Emphasizes safety procedures. Variable hours per week.

WEL     130

130     WEL 130 INERT GAS WELDING (3 CR.) Introduces practical operations in the uses of inert-gas-shield arc welding. Discusses equipment, safety operations, welding practice in the various applications, manual and semiautomatic welding. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     130

130     WEL 130 INERT GAS WELDING (3 CR.) Introduces practical operations in the uses of inert-gas-shield arc welding. Discusses equipment, safety operations, welding practice in the various applications, manual and semiautomatic welding. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     130

130     WEL 130 INERT GAS WELDING (3 CR.) Introduces practical operations in the uses of inert-gas-shield arc welding. Discusses equipment, safety operations, welding practice in the various applications, manual and semiautomatic welding. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     130

130     WEL 130 INERT GAS WELDING (3 CR.) Introduces practical operations in the uses of inert-gas-shield arc welding. Discusses equipment, safety operations, welding practice in the various applications, manual and semiautomatic welding. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     141

141     WEL 141 WELDER QUALIFICATION TESTS I-II (3 CR.) Studies techniques and practices of testing welded joints through destructive and non-destructive testing. Part I of II. Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.

WEL     141

141     WEL 141 WELDER QUALIFICATION TESTS I-II (3 CR.) Studies techniques and practices of testing welded joints through destructive and non-destructive testing. Part I of II. Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.

WEL     141

141     WEL 141 WELDER QUALIFICATION TESTS I-II (3 CR.) Studies techniques and practices of testing welded joints through destructive and non-destructive testing. Part I of II. Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.

WEL     141

141     WEL 141 WELDER QUALIFICATION TESTS I-II (3 CR.) Studies techniques and practices of testing welded joints through destructive and non-destructive testing. Part I of II. Lecture 2 hours. Laboratory 3-6 hours. Total 5-8 hours per week.

WEL     195

195     WEL 195 – TOPICS: WELDING PROCESSES (3 Crs) – Introduces types of welding, their advantages and disadvantages. Points out effects of welds on metals to be machined. Provides practice and demonstration in welding. Also teaches basic pipe fitting and all position open butt welds in pipe. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     195

195     WEL 195 – Topics in Flux Core Arc Welding (1-5 Crs) – Introduces semi-automatic welding processes with emphasis on practical application. Includes the study of filler wires, fluxes and gases. Also teaches basic pipe fitting and all position open butt welds in pipe. Laboratory 3 hours, lecture 2 hours, total of 5 hours for 3 credit class.

WEL     195

195     WEL 195 – TOPICS IN GAS METAL ARC WELDING (1-5 Crs) – Introduces practical operations in the uses of inert-gas-shield arc welding. Discusses equipment, safety operations, welding practice in the various applications, manual and semi-automatic welding. Also teaches basic pipe fitting and all position open butt welds in pipe. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     195

195     WEL 195 – Topics in Flux Core Arc Welding (1-5 Crs) – Introduces semi-automatic welding processes with emphasis on practical application. Includes the study of filler wires, fluxes and gases. Also teaches basic pipe fitting and all position open butt welds in pipe. Laboratory 3 hours, lecture 2 hours, total of 5 hours for 3 credit class.

WEL     195

195     WEL 195 – TOPICS IN GAS METAL ARC WELDING (1-5 Crs) – Introduces practical operations in the uses of inert-gas-shield arc welding. Discusses equipment, safety operations, welding practice in the various applications, manual and semi-automatic welding. Also teaches basic pipe fitting and all position open butt welds in pipe. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     198

198     WEL 198 SEMINAR AND PROJECT IN WELDING (3 CR.) Completion of a project or research report related to the student’s occupational objective and a study of approaches to the selection and pursuit of career opportunities in the field. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     198

198     WEL 198 SEMINAR AND PROJECT IN WELDING (3 CR.) Completion of a project or research report related to the student’s occupational objective and a study of approaches to the selection and pursuit of career opportunities in the field. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     198

198     WEL 198 SEMINAR AND PROJECT IN WELDING (3 CR.) Completion of a project or research report related to the student’s occupational objective and a study of approaches to the selection and pursuit of career opportunities in the field. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     198

198     WEL 198 SEMINAR AND PROJECT IN WELDING (3 CR.) Completion of a project or research report related to the student’s occupational objective and a study of approaches to the selection and pursuit of career opportunities in the field. Lecture 2 hours. Laboratory 3 hours. Total 5 hours per week.

WEL     295

295     WEL 295 – TOPICS IN ARC WELDING II (3 Crs) – Teaches operation of AC transformer and DC motor generator arc welding sets, welding polarities, heats and electrodes for use in joining various metal alloys by the arc welding process; deals with running beads, butt, and fillet welds in all positions. Also teaches basic pipe fitting and all position open butt welds in pipe. Emphasizes safety procedures. Lecture 2 hours, lab 3 hours. Total 5 hours per week. (3 credits)

WEL     295

295     WEL 295 – TOPICS IN ARC WELDING II (3 Crs) – Teaches operation of AC transformer and DC motor generator arc welding sets, welding polarities, heats and electrodes for use in joining various metal alloys by the arc welding process; deals with running beads, butt, and fillet welds in all positions. Also teaches basic pipe fitting and all position open butt welds in pipe. Emphasizes safety procedures. Lecture 2 hours, lab 3 hours. Total 5 hours per week. (3 credits)

WEL     295

295     WEL 295 – Topics: Semi-Automatic Welding (3 Crs) – Introduces semi-automatic welding processes with emphasis on practical application. Includes the study of filler wires, fluxes and gases. Laboratory 3 hours, lecture 2 hours, total 5 hours for 3 credit class.

WEL     295

295     WEL 295 – Topics: Semi-Automatic Welding (3 Crs) – Introduces semi-automatic welding processes with emphasis on practical application. Includes the study of filler wires, fluxes and gases. Laboratory 3 hours, lecture 2 hours, total 5 hours for 3 credit class.